How to drive a bike without clutch wire

How to drive a bike without clutch wire


If you have a motorcycle then you must have faced breakdown problems 2 or 4 times a year. In such cases, sometimes you have to drag the bike to some distance and sometimes for several kilometers. Basically, this problem comes when your bike gets a flat tire. Even a Bike with a flat tire can be driven in some conditions but if your bike clutch wire breaks down in the middle of the road it may become impossible.

Then what will you do in this situation? Most of the people will drag their bikes in this situation. But in such a difficult time, we can reduce your problem, because we want to tell you that the bike can be driven even in the event of a clutch wire snap.
Although riding a bike without clutch wires is not easy, and especially not even for beginners, but it is also not so difficult. You do not have to do much for this. First of all, park the bike instead of pushing or shaking. If you have done this then, you have won half way. Yes, you have done this. After this, take a breath of comfort, because now you are going to do something different.

Start the bike now and put it in neutral. Now when you have done this, sit on the bike. Keep in mind that it should always be in your mind that you are running a non-clutch wired bike. In such a situation, the bike will always be disturbed. Now hold the handle of the bike simply like you would be regularly doing it. But this time keep your control and hold a bit higher than before. That's because your bike is not fully ready and the incomplete thing is always complicated.
After that get ready for the last step. Now press the clutch without putting your bike in the first gear. Keep in mind that as you enter the gear, you also need to throttle the accelerator lightly. The race must be very slow. If the race is high then the bike will stop with a jerk again and not even at all. Also keep in mind that, as soon as you put the bike in the first gear and race, the bike will move forward with a jerk, which you have to handle. Going a little while, you now have a second gear in the moving bike in the same way and keep the grip strength. This jerk will be faster than ever but we know that you will handle it. In this way you will be able to ride your bike. But you have to take care of certain things.


Things to keep in mind for driving without clutch wire


  • Do not keep your bike speed more than 25 to 30 km per hour. Try that it is 20 km per hour.
  • Always ride the bike on the side of the road and keep your right indicator always running so that any vehicle coming from behind can keep its direction.
  • Minimize the use of brakes. If possible, choose the path where traffic and turnaround are minimal.
  • Keep your eyes roving alongside bike ride, so you can see a bike repair shop. The sooner you get the shop, you will be able to get te bike repaired.
  • Always keep in mind that you are running a non-clutch wired bike, so try not to experiment too much.

  • If you still don’t want to try this, then get ready to drag the bike a few kilometers.
I hope the above mention article about how to drive a bike without a clutch wire will help you in a situation like this.
Share:

No comments:

Post a Comment

Popular Posts

Top Convertible Cars of India

Contact Us

Name

Email *

Message *

Recent Posts